Under federal retirement rules established by the SECURE 2.0 Act, account holders cannot leave tax-deferred retirement balances unwithdrawn indefinitely. Once an account owner reaches age 73, the Internal Revenue Service requires annual withdrawals known as Required Minimum Distributions (RMDs) from traditional retirement plans. These mandatory distributions ensure that deferred income taxes are eventually recognized, calculating the annual dollar obligation by dividing the prior year-end portfolio balance by a designated life expectancy divisor.
Failing to take an RMD on schedule triggers statutory tax penalties, making understanding the timeline, account aggregation rules, and calculation mechanics essential for anyone approaching retirement age. For foundational guidance on retirement asset allocation and portfolio structure, explore our guide at ECMSource Start Here.
What Are Required Minimum Distributions (RMDs)?
A Required Minimum Distribution is the minimum dollar figure that an account owner must withdraw each year from qualified tax-deferred retirement accounts once reaching statutory age thresholds. For decades under previous tax law, mandatory withdrawals began at age 70.5, which the original SECURE Act of 2019 increased to age 72. The SECURE 2.0 Act of 2022 enacted further relief, raising the RMD age to 73 beginning on January 1, 2023, for individuals turning 72 in 2023 or later, with a scheduled increase to age 75 taking effect in 2033.
The primary regulatory purpose of RMD rules is tax collection. Traditional retirement plans allow workers to contribute pre-tax earnings and enjoy decades of compounded investment growth without annual tax drag. In exchange for this tax deferral, Congress mandates that retirees begin withdrawing funds gradually across their remaining life expectancy, converting portfolio assets into ordinary taxable income.
Which Retirement Accounts Require Annual Distributions?
RMD obligations apply to nearly all employer-sponsored qualified plans and individual tax-deferred retirement accounts. Specifically, mandatory withdrawals apply to:
- Traditional Individual Retirement Arrangements (IRAs)
- Simplified Employee Pension (SEP) IRAs
- Savings Incentive Match Plan for Employees (SIMPLE) IRAs
- 401(k) corporate retirement plans
- 403(b) tax-sheltered annuity plans for public schools and non-profits
- 457(b) deferred compensation plans for governmental employers
- Profit-sharing plans and defined contribution plans
Roth IRAs represent the most notable exception to lifetime RMD rules. Original owners of Roth IRAs are never subject to mandatory distributions during their lifetime, because contributions are made with after-tax earnings and qualified distributions are completely tax-free. Furthermore, under the SECURE 2.0 Act, employer-sponsored designated Roth accounts (such as Roth 401(k) and Roth 403(b) balances) are also permanently exempt from pre-death RMDs starting in tax year 2024, aligning employer Roth accounts with traditional Roth IRAs. To understand the differences between these vehicles, read our analysis on Traditional vs. Roth IRA tax rules.
Retirees who hold conservative cash allocations within their retirement accounts should also understand custody safeguards. Under official banking guidelines, cash held inside bank-deposit retirement accounts receives separate deposit coverage: according to the Federal Deposit Insurance Corporation, all retirement accounts listed above owned by the same person at the same bank are added together and insured up to $250,000, maintaining distinct protection from non-retirement personal deposit accounts.
The RMD Calculation Formula and Uniform Lifetime Table
The Internal Revenue Service calculates RMD amounts using a uniform mathematical formula published under Treasury regulations and detailed on the Internal Revenue Service Required Minimum Distributions portal. According to the IRS, the required minimum distribution for any year is the account balance as of the end of the immediately preceding calendar year divided by a distribution period from the IRS’s Uniform Lifetime Table.
The statutory calculation formula is:
Annual RMD = Prior Year-End Account Balance (as of December 31) ÷ Uniform Lifetime Table Divisor
The Uniform Lifetime Table assumes the account owner is unmarried or has a spouse who is not more than ten years younger. If an account owner’s sole primary beneficiary is a spouse who is more than ten years younger, the IRS permits the use of Table II (Joint Life and Last Survivor Expectancy), which produces a larger divisor and correspondingly smaller annual mandatory withdrawal.
As an individual ages, the distribution period decreases, which systematically increases the percentage of the account that must be distributed each year. The table below illustrates the IRS Uniform Lifetime Table divisors and resulting mandatory distribution percentages across early and mid-retirement ages.
| Retiree Age | IRS Uniform Table Divisor | Effective Distribution Rate (%) |
|---|---|---|
| Age 73 | 26.5 | 3.77% |
| Age 74 | 25.5 | 3.92% |
| Age 75 | 24.6 | 4.07% |
| Age 76 | 23.7 | 4.22% |
| Age 77 | 22.9 | 4.37% |
| Age 78 | 22.0 | 4.55% |
| Age 79 | 21.1 | 4.74% |
| Age 80 | 20.2 | 4.95% |
| Age 81 | 19.4 | 5.15% |
| Age 82 | 18.5 | 5.41% |
| Age 83 | 17.7 | 5.65% |
| Age 84 | 16.8 | 5.95% |
| Age 85 | 16.0 | 6.25% |
Worked Example: Step-by-Step RMD Math for a $500,000 Portfolio
To examine how annual distributions function across consecutive tax years, consider an investor who turns age 73 with a Traditional IRA balance evaluated over three sequential calendar periods.
Year 1 (Age 73)
Suppose the investor turns 73 during the tax year, having finished the prior calendar year with a balance of $500,000 as of December 31. Under the IRS Uniform Lifetime Table, the life expectancy factor for age 73 is 26.5.
- Prior year-end balance: $500,000
- Life expectancy divisor: 26.5
- Required distribution: $500,000 ÷ 26.5 = $18,867.92
- Effective distribution percentage: 3.77%
The retiree must withdraw at least $18,867.92 from their retirement portfolio during the distribution window. The distributed funds are included in taxable ordinary income for that tax year.
Year 2 (Age 74)
During the following calendar year, investment returns and market fluctuation alter the account balance. As of December 31 of Year 1, after the first RMD is satisfied and portfolio gains occur, the account balance stands at $510,000. For age 74, the IRS Uniform Lifetime Table divisor drops to 25.5.
- Prior year-end balance: $510,000
- Life expectancy divisor: 25.5
- Required distribution: $510,000 ÷ 25.5 = $20,000.00
- Effective distribution percentage: 3.92%
Year 3 (Age 75)
In the subsequent year, after a market decline and prior withdrawals, the account balance as of December 31 stands at $490,000. At age 75, the Uniform Lifetime Table divisor decreases to 24.6.
- Prior year-end balance: $490,000
- Life expectancy divisor: 24.6
- Required distribution: $490,000 ÷ 24.6 = $19,918.70
- Effective distribution percentage: 4.07%
Notice that even though the portfolio balance decreased by $20,000.00 between Year 2 and Year 3, the required withdrawal amount remained almost identical ($19,918.70 versus $20,000.00) because the declining divisor increases the mandatory distribution rate from 3.92% to 4.07%.
The First-Year April 1 Deadline and the Double-Distribution Trap
One of the most frequent points of confusion for new retirees is the Required Beginning Date (RBD). For every subsequent year of retirement, an RMD must be completed by December 31. However, for the very first year an individual reaches age 73, the IRS grants an administrative extension: the first RMD can be delayed until April 1 of the calendar year following the year the individual turns 73.
While delaying the initial RMD until April 1 provides short-term cash flow flexibility, it creates what financial planners call the “double-distribution trap.” If a retiree postpones their first RMD to April 1 of Year 2, they must still take their second RMD (the distribution for Year 2 itself) by December 31 of that same calendar year.
Taking two full RMDs in a single tax year combines both distributions into that calendar year’s adjusted gross income. This sudden income spike can push the retiree into a higher marginal tax bracket, trigger higher taxes on Social Security benefits, or cross income thresholds that increase Medicare Part B and Part D premiums through Income-Related Monthly Adjustment Amounts (IRMAA). For most individuals, taking the first RMD by December 31 of the year turning 73 spreads taxable income evenly across both tax years.
Account Aggregation: Where Can You Pull Your RMD?
Investors often maintain multiple retirement accounts accumulated across decades of employment. IRS aggregation rules vary significantly depending on whether the accounts are IRAs or employer-sponsored workplace plans:
- Traditional IRAs (including SEP and SIMPLE plans): You must calculate the RMD separately for each traditional IRA account you own based on its prior year-end balance. However, once the individual account RMDs are calculated, you can add them together and withdraw the total cumulative amount from any one IRA or combination of IRAs you choose.
- 403(b) Tax-Sheltered Annuities: Similar to IRAs, a participant with multiple 403(b) contracts must calculate the RMD for each contract separately, but may aggregate the total required distribution and withdraw it from one or more 403(b) plans.
- 401(k) and 457(b) Employer Plans: Aggregation across employer plans is strictly prohibited. If you maintain 401(k) accounts from three former employers, you must calculate the RMD separately for each plan and take the specific calculated distribution directly from that specific plan. You cannot satisfy a 401(k) RMD by withdrawing extra funds from an IRA or another company’s 401(k).
Excise Tax Penalties for Missed RMDs Under SECURE 2.0
Under Internal Revenue Code Section 4974, failing to distribute the full RMD amount by the statutory deadline incurs an excise tax penalty on the shortfall. Prior to 2023, the penalty for a missed RMD was among the harshest in the federal tax code: a 50% excise tax on the undistributed amount.
The SECURE 2.0 Act significantly reduced this burden. Under current law, the statutory excise tax penalty is reduced to 25% of the undistributed RMD amount. Furthermore, if the taxpayer corrects the shortfall during a two-year correction window and submits IRS Form 5329, the penalty is further reduced to 10%.
To see the financial difference between statutory and reduced penalty relief, consider our age 73 example with a required distribution of $18,867.92:
- Uncorrected statutory penalty at 25%: $18,867.92 × 0.25 = $4,716.98
- Timely corrected penalty at 10%: $18,867.92 × 0.10 = $1,886.79
- Penalty reduction savings from timely correction: $4,716.98 − $1,886.79 = $2,830.19
If an RMD was missed due to reasonable error (such as serious illness, custodian miscalculation, or administrative transfer delay), taxpayers can request a complete waiver of the penalty by filing IRS Form 5329, paying the distribution immediately, and attaching a written statement explaining the reasonable cause.
Key Takeaways
- Starting Age: Required Minimum Distributions begin at age 73 under current SECURE 2.0 rules, with a planned increase to age 75 scheduled for 2033.
- Mathematical Formula: Annual RMD equals prior year-end balance divided by the IRS Uniform Lifetime Table divisor (starting at 26.5 for age 73).
- Roth Treatment: Roth IRAs and designated employer Roth accounts are exempt from lifetime RMDs during the original account holder’s life.
- Penalty Structure: Missed RMDs face a 25% excise tax under SECURE 2.0, reduced to 10% if corrected within the statutory two-year window.
Related Reading
Sources
- Internal Revenue Service: Retirement Topics — Required Minimum Distributions (RMDs)
- Federal Deposit Insurance Corporation: Financial Products Insured — Deposit Coverage on Retirement Accounts
Disclosure: This article is for informational purposes only and is not investment advice.